UPS systems: uninterruptible power supply solutions
A pure sine wave, 100% isolation and switchover to battery with zero transfer time, thanks to Online Double Conversion technology.
Industrial-grade protection
Designed for server rooms, production lines and critical infrastructure.
Choosing the right uninterruptible power supply (UPS) is critical for systems that cannot tolerate a power cut, such as companies running server rooms, manufacturing facilities working with PLC and automation systems, laboratories and security camera infrastructure. We measure your load, calculate the required kVA capacity and battery runtime, and select a vendor-neutral device to fit your needs.
Complete protection for critical infrastructure
Double Conversion
Full isolation from the mains through AC → DC → AC conversion.
0 ms Transfer
Instant switchover to battery when mains power fails; systems stay on.
Smart Charging
Adaptive charging algorithms that extend battery life.
Modular Power
Parallel UPS configurations that scale with your needs.
How does a UPS project progress?
A planned process in four steps, from load measurement to periodic maintenance.
Site survey and load measurement
We list the devices to be protected and measure current consumption, and inspect the electrical panel, earthing and ventilation of the area where the UPS will be installed on site.
Capacity and topology selection
The kVA rating and battery bank are calculated from the total load, growth margin and required battery runtime; a single, parallel or modular set-up is chosen.
Installation and commissioning
Panel connections, the maintenance bypass arrangement and battery cabinets are installed; an outage scenario is tested to verify switchover to battery and monitoring notifications.
Periodic maintenance and support
Battery health measurements and device checks are carried out regularly. One year of free maintenance on enterprise projects, followed by SLA-based 24/7 support.
Frequently asked questions about choosing and installing a UPS
The power consumption of all devices to be connected to the UPS is added up, converted into kVA taking the power factor into account, and a growth margin is left for devices to be added later. Since nameplate ratings often differ from actual consumption, we believe measuring the load during the site survey gives a more accurate result. The battery bank is then sized according to the required battery runtime.
An online (double conversion) UPS continuously converts incoming mains power to direct current and back to alternating current; the load is always supplied with a clean, stable voltage and switchover to battery during an outage is instantaneous. A line-interactive UPS normally passes mains power through with voltage regulation and switches to battery with a brief transfer when an outage occurs. Online UPS units suit servers, PLCs and sensitive production equipment, while line-interactive models can be considered for less critical loads such as office computers.
It depends on the goal. If the aim is to shut systems down safely, a short runtime may be enough; if the UPS is to bridge the gap until a generator starts, the generator's start-up time is the basis; if operations must continue throughout the outage, runtime is extended with external battery cabinets. We make this decision together with you during the site survey.
Battery life depends on ambient temperature, discharge frequency and charging conditions, and can be shorter than the manufacturer's stated design life. That is why, rather than following a fixed schedule, we measure the internal resistance and capacity of the batteries during periodic maintenance and report under-performing batteries before a critical outage occurs.
Yes. One year of free maintenance is included in enterprise projects; during this period we periodically carry out battery measurements, fan and connection checks, and tests of monitoring software notifications. After that, maintenance can continue with SLA-based 24/7 support packages.
Related services, projects and industries
Secure your power infrastructure
End-to-end support with capacity calculation, installation planning and maintenance services.